Table Des Matières; Warnings; Before Installation; Care And Cleaning - Toto GO TLG01201U Manuel D'installation Et D'utilisation

Thanks for Choosing TOTO!...............2
Warnings...............................................2
Before Installation................................2
Care and Cleaning...............................2
Included Parts.......................................3
THANK YOU FOR CHOOSING TOTO!
The mission of TOTO is to provide the world with healthy, hygienic and more
comfortable lifestyles. We design every product with the balance of form and
function as a guiding principle. Congratulations on your choice.
For safe operation of the faucet, please observe the following:
Operating Pressure:
Minimum Pressure....................20 psi (138 kPa), dynamic
Maximum Pressure...................80 psi (551 kPa), static
Do not use the product at an ambient temperature below 32º F (0º C)
Observe all local plumbing codes.
Before installing the faucet, be sure to thoroughly flush the supply pipes of dirt
and debris.
Make sure the water supply is shut off at the stop valve.
Read these instructions carefully to ensure proper installation.
TOTO reserves the right to update product design without notice.
Your new faucet is designed for years of trouble-free performance. Keep it
looking new by cleaning it periodically with mild soap, rinsing thoroughly
with warm water and drying with a clean, soft cloth. Do not use abrasive
cleaners, steel wool or harsh chemicals, as thes will dull the finish. Failure to
follow these instructions may void your warranty
TABLE OF CONTENTS
Tools You Will Need.............................3
Specifications........................................3
Installation Procedure..........................4
Warranty................................................8
Rough-In Dimensions.........................30

WARNINGS

BEFORE INSTALLATION

CARE AND CLEANING

2
Tools You Will Need.............................3
Specifications........................................3
Installation Procedure..........................4
Warranty................................................8
Rough-In Dimensions.........................30