Electronic Control - Indel B TB13 Instructions D'utilisation

TB 13

ELECTRONIC CONTROL

The device is equipped with a battery monitor that protects your vehicle battery against excessive discharging
when the device is connected to the on-board DC supply.
If the cooler is operated when the vehicle ignition is switched off, the cooler switches off automatically as
soon as the supply voltage falls below a set level. The cooler will switch back on once the battery has been
recharged to the restart voltage level. The compressor will start up again automatically when the voltage
goes back to normal values.
Note: these values are measured at control unit input and/or on the DC socket.
NOTICE! Danger of damage!
When switched off by the battery monitor, the battery will no longer be fully charged. Avoid starting repeatedly
or operating current consumers without longer charging phases. Ensure that the battery is recharged.
BATTERY PROTECTION LEVEL
Switch-off voltage at
12 V (CUT-OUT)
11.1
INSTRUCTIONS
Warning!
Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
Warning!
Do not use mechanical devices or other means to accelerate the defrosting process, other than those
recommended by the manufacturer.
Warning!
Do not damage the refrigerant circuit.
Warning!
Do not use electrical appliances inside the food storage compartments of the appliance, unless they are
of the type recommended by the manufacturer.
Warning!
Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
Warning!
Risk of fire and electrical shock or fire.
Warning!
Do not let hot items to touch the plastic parts of the appliance.
TB13_21-05-2018
Restart-voltage at 12 V
(CUT-IN)
12.4
Switch-off voltage at
24 V (CUT-OUT)
22.3
ENGLISH
Restart-voltage at 24 V
(CUT-IN)
23.6
11