Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GB
Maintenance Interval Table
Machine.part
Components of the chain
brake
Sprocket chain wheel
Saw chain (5)
Guide bar (4)
Oiling the saw chain
Clean and oil the chain regularly.
In this way, you keep the chain
sharp and get optimum machine
performance. In case of damage
due to inadequate maintenance of
the saw chain, the guarantee claim
is invalid.
Remove the power plug and use
cut-protection gloves when you are
handling the chain or the chain bar.
•
Oil the chain after cleaning, after 10
hours of use or at least once weekly,
depending on which comes first.
•
Before oiling, the chain bar must be
cleaned thoroughly, in particular the
teeth of the rail. Use a whisk and a dry
cloth for that.
•
Oil the individual chain links with the
aid of an oil suction gun with pinpoint
tip (available in the specialist trade).
Place individual oil drops onto the ar-
ticulated links and onto the tooth tips of
the individual chain links.
66
Action
Check, replace if required
Check, replace if required
Check oil, regrind or re-
place if required
Check, turn round, clean
and oil
Before.
every.
use
Sharpening the saw chain
. An.incorrectly.sharpened.
saw.chain.increases.the.dan-
ger.of.spring-back!.
Use.cut-protection.gloves.
when.you.are.handling.the.
chain.or.the.chain.bar.
A sharp chain guarantees an op-
timal cutting performance. It eats
effortlessly through the wood and
leaves large, long wooden chips.
A saw chain is blunt if you have to
press the cutting equipment through
the wood and the wooden chips
are very small. In the case of a very
blunt saw chain, no chip cuttings
result at all, only sawdust.
•
The sawing parts of the chain are the
cutting elements, which consist of a cut-
ting tooth and a depth limiting projec-
tion. The vertical separation distance
between these two determines the
sharpness depth.
•
The following values must be noted in
sharpening the cutting teeth:
After.10.hours. .
of.operation
Publicité
Chapitres
Table des Matières
