Wake-Up Alarm Function - Bresser TemeoTrend SW Mode D'emploi

4.3.2 WAKE-UP ALARM FUNCTION

There are three time alarms available on the main unit:
• Weekday Alarm
The alarm sound will be activated and the icon will fl ash on week-
days (Mo-Fr) when it is armed and the alarm time is reached.
• Single Alarm
The alarm sound will be activated and the icon will fl ash when it
is armed and the alarm time is reached. Once it fi nished, it will
be disabled automatically
• Pre-Alarm
The pre-alarm will be activated and the icon will fl ash if the tem-
perature of channel 1 is falling to +0 ºC or below. It is program-
mable 15, 30, 45, 60 or 90 minutes earlier than the weekday
alarm or single alarm time.
ACTIVATING / DEACTIVATING THE TIME ALARMS
1. Press ALARM to rotate between:
• Weekday Alarm Time (displays OFF if weekday alarm deactiva-
ted)
• Single Alarm Time (displays OFF if single alarm deactivated)
• Pre-Alarm Time (displays OFF if pre-alarm deactivated)
2. When the above alarms are displayed, pressing UP (▲) will
activate, pressing DOWN (▼) will deactivate the correspon-
ding alarm.
Note: Press MODE anytime during above alarm selection mode
to return to normal clock display.
SETTING THE TIME ALARMS
1. Press ALARM to select the alarm which you wish to confi gure.
2. Press and hold ALARM until hour starts fl ashing in the display
45
GB/IE