Bresser TemeoTrend SW Mode D'emploi page 33

A. WEATHER window
B. TEMPERATURE window
C. CLOCK window
D. (▼) (DOWN) button
• Select the other window (Clock or Temperature)
• Press and hold for 2 seconds to search for wireless signal from
remote sensor.
• Decrease parameters in the setting mode.
E. ALARM button
• When clock window has been selected, press once to display
the alarm time of weekday alarm (W), single alarm (S) and pre-
alarm (Pre-AL). ---> Hold for 2 seconds, set weekday, single or
pre-alarm's alarm time.
• When temperature window has been selected, press once to
display the highest or lowest temperature alarm's value.
---> Hold for 2 seconds, set the highest or lowest temperature
alarm's value.
• When alarm (time or temprature) is on, press once to stop the
alarm.
E. CHANNEL button
• Press to display the outdoor temperature readings of Channels
1, 2 and 3. (additional remote sensors are required)
• Hold for 2 seconds, enter into the circulation mode and
outdoor temperature readings of Channels 1, 2 and 3 will be
displayed automatically in every 5 seconds.
G. MODE button
• When clock window has been selected, press once to toggle
between time with seconds display or time with weekday dis-
play. ---> Press and hold for 2 seconds, set language of the
day of the week, year digit, month digit, date digit, hour format
(12/ 24 hours), calendar format, hour digit and minute digit.
33
GB/IE