Clock Window; Time Function - Bresser TemeoTrend SW Mode D'emploi

alarm selection screen ACTIVATING OR DEACTIVATING TEMPE-
RATURE ALARMS: Once the above alerts are displayed, press the
UP (▲) to enable or DOWN (▼) to disable the alert.
VIEWING MAX/MIN READINGS
Select the TEMPERATURE window.
Press the MEM button to read the minimum temperature of all
sensors (indoor and remote) with the MIN, next MEM press the
maximum values with the MAX icon and then back to the current
values.
RESETTING TEMPERATURE MEMORIES
Select the TEMPERATURE window
Press and hold the MEM button for 3 seconds to clear all max/
min memories.

4.3 CLOCK WINDOW

For all operations described in Chapter 4.3, press UP ▲ or
DOWN ▼ until the TIME icon, in the left corner of the time
window, begins to fl ash.

4.3.1 TIME FUNCTION

The radio controlled time signal (DCF 77) is transmitted from the
central atomic clock in Frankfurt/Main. It has a reception range
of approx. 1500 km. If the (
the time and date are not set automatically, please consider the
following:
During night-time hours, atmospheric disturbances are typically
less severe and radio signal reception may improve. A single daily
reception is suffi cient enough to keep the clock accuracy within
1 second.
Make sure the unit is positioned at least 2 meters (8 feet)
) tower icon is not fully lit ( ), or if
42