Operation; Important - Bresser TemeoTrend SW Mode D'emploi

4. OPERATION

Immediately after batteries are installed, the remote sensor will
start transmitting the temperature data to the main unit in regular
intervals.
Once the main unit is powered-up by activating the batteries, the
display will show all available LCD segments for a moment.

IMPORTANT:

After this, the unit will scan the remote sensors (Ch 1 to Ch 3) in
the
Temperature Window. There is no immediate need to press any
button during this process. After this, the unit will start to scan
the DCF77 time transmitter in the Clock Window. Thereby, the
default time the unit has started with at the beginning is 12:00.
Here too, there is no immediate need to press any button during
this process.
Recommendation:
Allow the unit to receive the sensors and the time without tou-
ching ANY button for about 6-8 minutes during the main unit ini-
tial set up. This will give the unit time to synchronize with remotes,
stabilize pressure readings and settle with default settings.
38