Bresser TemeoTrend SW Mode D'emploi page 44

4. If the radio signal is received, the date & time will be set auto-
matically and the radio control signal icon [
5. If the clock fails to receive the time signal, it will show the [ ]
icon. If the time is notcorrect, you may set the time manually.
HOW TO SET THE CLOCK MANUALLY
To set the clock manually, make sure the display shows the time
(not the ZONE) and then press and hold MODE. Now it will show
the language. You may choose among English (En), German (DE),
French (Fr), Italian (IT), Spanish (SP), Dutch (Du) and Swedish
(SW). Press UP (▲) or DOWN (▼) to change it. Press MODE to
confi rm. Repeat the same procedure to set the year, month, day,
day-month format, 12/24 hour format, hour and minute. During
the setting, press and hold will change the value rapidly. If there is
an item you do not wish to change, simply press MODE to bypass
the item. After the last setting, pressing MODE will exit the setting
mode and return to the clock mode.
HOW TO SET THE TIME ZONE
To set the time zone, make sure the display shows the time with
the ZONE icon. Then press and hold MODE.
Press UP (▲) or DOWN (▼) to adjust value in steps of 30 min.
Press and hold either button for fast advance. Press MODE to
confi rm your selection.
SELECT THE CLOCK/CALENDAR DISPLAY
Each time you press MODE, you may rotate from one of the fol-
lowing displays to the next:
• Hour: Minute: Second
• Hour: Minute: Weekday
• Hour: Minute: Weekday of the Time Zone
• Hour: Minute: Second of the Time Zone
• Day: Month
44
] turns on.