Scope Of Delivery; Initial Operation; Parts Overview - Bresser Temeo Hygro Circuitu Mode D'emploi

shocks! Use only the recommended
batteries. Always replace weak or
empty batteries with a new, complete
set of batteries at full capacity. Do not
use batteries from different brands
or with different capacities. The
batteries should be removed from the
unit if it has not been used for a long
time. Never recharge normal, non-
rechargeable batteries. This could
lead to explosion during the charging
process.
The manufacturer is not liable for
damage related to improperly installed
batteries.

Scope of delivery

Weather station, operating instructions.
AAA/LR03 batteries required (not
included with delivery).

Parts overview

b RESET button
c Wall mount
d °C/°F button
e Battery compartment
f Table stand
g Indoor temperature MIN/MAX
h Indoor humidity MIN/MAX
i Indoor temperature
j Indoor humidity
1) Comfort Level display

Initial operation

1. Remove the battery compartment
cover of the weather station.
2. Insert new AAA / LR03 batteries
into the battery compartment of the
weather station. Pay attention to
the correct polar orientation of the
batteries as shown in the compartment
when inserting.
NOTE: Replace the batteries in the
weather station if the display of the
weather station becomes faint.
Display
When humidity is under 20% for 24
consecutive hours, the MIN Display
shows MIN. When the current hu-
midity is lower than 20%, main area
GB
9