EUROM NARVIK Mode D'emploi page 25

26. The bulbs are the only parts of this device that the user may replace themselves.
Any other repairs to the fireplace, cable or plug must always be carried out by
qualified personnel. Repairs that have not been carried out correctly may pose a
risk!
27. Only use the fireplace for its intended purpose and as stipulated in this instruction
booklet.
Failing to adhere to instructions 25, 26 and 27 could lead to damage, fire and/or
personal injury. This will invalidate the guarantee and the supplier, importer and/or
manufacturer will take no responsibility for the consequences!
Description
The NARVIK comprises an atmospheric fireplace (containing a heating element and
ventilator which blows warm air out of the top of the fireplace), wall supports, a
remote control and this instruction booklet.
The atmospheric fireplace is covered with a rounded glass plate at the front. There
is a metal cabinet behind this which contains the atmospheric elements at the front,
air grilles and the operating panel at the sides and, on top, the grille which is used to
blow out warm air. The hanging bracket is located at the back and the technical
aspects are housed internally.
The wall supports must be attached to the wall so that the fireplace can be hung on
them. Screws, plugs, a spacer bracket and self-tapping screws are supplied.
There are four buttons on the remote control; one red and three black. The red
button switches the atmospheric screen on; the two upper black buttons are for
setting heat levels (1000 and 2000 Watt respectively) and the lower black button (the
dimmer) is used to regulate the clarity of the screen.
Please keep the instruction booklet somewhere safe for reference or for providing
with the device if it is sold on.
25
Remote control:
25
A. ON/OFF button
B. Button for setting
the time
C. + button
D. Erasing the time
setting
E. Timer on/off button
F. Dimmer button
G. DAY and TIME
button
H. - button
I. Automatic output
selection
J. 1000W button
K. 2000W button