Bodum 11515 Mode D'emploi page 8

of the machine. Turn the Slicer
Shredder counterclockwise up to the
stop. (Fig. 4)
To remove the Slicer Shredder from the
machine, follow the steps in reverse
order. You should for this purpose
switch the speed control of the Stand
Mixer to "stop". Make sure that the
ON/OFF switch is in the "OFF" position
and the power cord is unplugged. Do
not forget at the end to attach the
cover of the accessory connector
again.
HOW TO USE THE SLICER
SHREDDER
The Slicer Shredder is designed for
the cutting, shredding or grating of
vegetables, fruit or cheese. Best
results are obtained with firm and
fresh fruits and vegetables as well as
cold cheese.
DO NOT LET THE SLICER SHREDDER
TOGETHER WITH THE FOOD
PROCESSOR RUN FOR LONGER THAN
5 MINUTES. YOU SHOULD THEREBY
USE THE SPEED LEVEL 4 OR 5.
1. Attach the Slicer Shredder to the
food processor. Place a collecting bowl
under the Slicer Shredder.
2. Place the ingredients into the filling
funnel, where possible, fill it to the
brim.
3. Turn on the Stand Mixer and switch
it to speed level 4 or 5. Press the
plunger down gently. Ensure that the
plunger only fits one way into the filler
neck.
SLICER SHREDDER IS
yOUR
EQUIPPED WITH 4 DIFFERENT
DRUMS:
Coarse shredding drum (5)
For the coarse shredding of chocolate,
nuts, cheese and potatoes (hash
browns or potato pancakes).
Fine shredding drum (6)
For the fine shredding of chocolate,
nuts, crackers, carrots and cheese.
Slicing drum (7)
Slicing of onions, herbs, cabbage,
cucumbers, carrots, apples, potatoes
and beetroot.
Parmesan grating drum (8)
For the grating of hard cheese
(Parmesan).
NOTE: Do not process hard objects
such as nutmegs, fruit kernels or nut
shells.
CLEANING AND MAINTAINANCE
– Wash all parts with hot water. You
can use a mild detergent. Never use
any abrasive cleaner. You can clean
all parts of the Slicer Shredder in
the dishwasher.
– Make sure all parts are completely
dry before use.
Only use Authorized Service Centers
for repairs.
9