Introduction - Megger MPM2000 Guide De L'utilisateur

Introduction

Thank you for purchasing this quality AVO product. Before attempting use of your new instrument please take the
time to read this user guide, ultimately this will save you time, advise you of any precautions you need to take
and could prevent damage to yourself and the instrument.
The MPM2000 and MPM2000H are advanced optical power meters that can be used for optical loss testing of
fibre optic cables. These have been pre-calibrated for absolute power levels with reference to 1mW (dBm) for
850nm, 1300nm, 1310nm and 1550nm laser wavelengths. A further ten wavelengths can be programmed in at
the factory.
With its high-resolution reading (to 0.01 dBm) and wide dynamic range (+10dBm to –70dBm for MPM 2000,
+20dBm to –60dBm for MPM 2000H) this instrument favours single mode operation and is supplied with a single-
mode patch lead. However it can also be used with multi-mode fibre optic cables and corresponding multi-mode
patch leads are available in the Accessories. With such a wide dynamic resolution, this product is ideal for CATV
and other long distance transmission applications.
4