Select Cycle; Pull Control Dial Out To Start - Maytag Performa PAVT144AWW Guide D'utilisation Et D'entretien

STEP 3

Select Cycle

To select a cycle, push the control dial IN (off position)
and turn it to the right (clockwise) until the pointer is
at the soil level needed for the wash load in the
Regular, Wrinkle Free or Delicates cycles.
Regular Fabrics Cycle
Provides normal agitation and normal spin speeds to
wash cottons and heavily soiled items. For maximum
cleaning, set the dial at Extra Heavy.
Wrinkle Free Fabrics Cycle
Provides normal agitation speed for six minutes, a
pause, then normal agitation for the remainder of the
wash cycle with a spray rinse added after the wash
cycle to sufficiently remove all the detergent from the
clothing. Spin speed will be normal to reduce water
retention.
Delicates Cycle
Provides a shortened wash cycle for delicates and
knits.
STEP 4

Pull Control Dial Out to Start

You may stop the washer at any time by simply pushing
the control dial IN. Therefore it is possible to obtain a
non-agitated soak or to shorten, skip or repeat any part
of a cycle. The control dial must be pushed IN (off
position) when you change the setting.
Note
• Do not attempt to turn the control dial
counterclockwise. Damage to the timer will result.
4