Select Cycle; Pull Control Dial Out To Start - Maytag Admiral AAV-1 Guide D'utilisation Et D'entretien

STEP 3

Select Cycle

To select a cycle, push the control dial IN (off position)
and turn it to the right (clockwise) until the pointer is
at the number of minutes needed for the wash load in
the Regular Fabrics, Wrinkle Free Fabrics or Delicates
cycles.
Regular Fabrics Cycle
Provides normal agitation and normal spin speeds to
wash cottons and heavily soiled items. For maximum
cleaning, set the dial at 14 minutes.
Wrinkle-Free Fabrics Cycle
Provides normal agitation and slow spin speed to
protect wrinkle free fabrics.
Delicates Cycle
Provides slow agitation speed and slow spin speed for
delicates and knits.
STEP 4

Pull Control Dial Out to Start

You may stop the washer at any time by simply
pushing the control dial IN. Therefore it is possible to
obtain a non-agitated soak or to shorten, skip or
repeat any part of a cycle. The control dial must be
pushed IN (off position) when you change the setting.
Note
• Do not attempt to turn the control dial
counterclockwise. Damage to the timer will result.
4