Troubleshooting - Bartscher IK 20 Mode D'emploi

7. Troubleshooting

Error Message
E01
E02
E03
Cause
• The device becomes too
hot (e.g. due to blocked
ventilation slots)
•
Parts are damaged
(e.g. transistor)
• Overheating-protection
was activated and the
device switched off.
• Short-lasting power
surge or lower tension
Solution
• Clear/unblock ventilation slots.
Let the device cool off for a few
minutes; the device is ready for
operation afterwards. Contact the
retailer in case the error
message remains indicated in
the display after the device has
cooled off.
•
Contact retailer.
• Remove the cookware from the
hob. Let the device cool off for a
few minutes. The device is ready
for operation afterwards.
• Remove the unit from the socket
(remove the plug!). Re-connect
the unit after several minutes.
- 31 -