Troubleshooting; Product Information - Vornado 723DC EU Guide D'utilisation

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE AND SOLUTION
The unit fails to power on. Unit is not plugged in. Plug Power Cord into electrical outlet. Ensure the AC power cord is plugged into
the power supply and ensure DC power cord is plugged into the circulator.
Ensure unit fan speed setting is selected.
Unit is damaged or in need of repair. Cease usage and unplug. Contact Consumer Service for assistance.
The outlet is worn or damaged. Try another outlet or contact a qualified electrician.
Airflow is weak or slow. Unit set to a low speed setting. Adjust to a higher speed setting.
Airflow is blocked. Remove obstruction.
Adjust direction of airflow towards the user.
GFCI has tripped. Under certain conditions, it is possible for a reset GFCI (Ground Fault Circuit Interrupter) outlet to trip
when the user is changing speeds on a Vornado circulator. In this event, change to an outlet that is not
connected to a GFCI device. It could also indicate a weak or defective GFCI outlet. Contact a qualified
electrician to check the GFCI outlet.
8 English

PRODUCT INFORMATION

Model(s): 723DC-EU
Description Symbol Unit Value*
Input Voltage V 100-240
Mains Voltage Frequency Hz 50/60
Protection Class Class IPX0
Dimensions W x H x D 42 x 38 x 42
(cm)
Weight Approx. (g) 4,720
Fan Power Input P Watts (W) 62.18
Maximum Fan Flow Rate F m /min 53.07
3
Service Value SV (m /min)/W 0.85
3
Standby Power Consumption P Watts (W) 0.00
SB
Emitted Sound Level L dB(A) 65.03
WA
Maximum Air Velocity c m/sec 5.42
IEC 60879: 1986 corr(1992)
Measurement Standard For
Service Value GB/T 13380-2007
Contact Details For Obtaining Vornado Air LLC
More Information 415 East 13th Street
Andover, KS 67002 USA
* values are for the 723DC fan and the supplied DC
power transformer combined.
English
9