Settings 2 - Esoteric K-01XD Mode D'emploi

Settings 2

PCM signal D/A conversion mode setting
PCMM>***
This sets the D/A conversion mode for PCM signals from CD playback
or from an external digital input (RCA in, OPT in, USB in).
Set it as desired.
o By default, the setting is M1.
M1
Mode 1 is used for D/A conversion of PCM input signals.
M2
Mode 2 is used for D/A conversion of PCM input signals.
M3
Mode 3 is used for D/A conversion of PCM input signals.
PCM output gain setting
PCMG>***
Use this to set the gain for PCM signal playback. This can be used
to reduce the volume difference between PCM and DSD signal
playback.
Set it as necessary.
o By default, the setting is FULL.
FULL
The gain is not adjusted.
LOW
PCM signal gain is reduced from the original setting before output.
Use when the volume of PCM signals during playback seem loud
compared to DSD signals.
DSD filter setting
DSDF>***
Use to set the digital filter during DSD playback.
Set it as desired.
o By default, the setting is OFF.
OFF
No digital filter is used.
F1
Digital filter 1 is used.
F2
Digital filter 2 is used.
F3
Digital filter 3 is used.
Remote control input (RS-232C) connector
setting
RS232C>***
Set this to ON only when using the remote control input (RS-232C)
connector.
o By default, the setting is OFF.
OFF
The remote control input (RS-232C) connector cannot be used.
ON
The remote control input (RS-232C) connector can be used.
Audio program update setting
AUD_UPDATE
Use to update the audio signal processing program of the unit.
See the explanation included with the update program for details about
how to update.
27