Table Des Matières; Package Contents - Yamaha NS-P285 Mode D'emploi

Package contents................................................1
Installing the speakers.......................................1
Installing the front, center, and surround
speakers ...........................................................2
Installing the subwoofer.......................................2
Wall-mounting the speakers................................2
Attaching the speaker stands...............................2
Thank you for choosing the Yamaha NS-P285 5.1CH Speaker Package.
Make sure the package contains the following items.
■ Center speaker
Non-skid pad
Before you connect the speakers, place each speaker in
its respective location. Speaker positioning is very
important as it affects the overall sound quality of the
system. Place the speakers in locations that will
optimize the sound quality at your listening position.
Refer to the illustration.
The position of the subwoofer is not as critical as the
position of the other speakers because sub-bass
sounds are not very directional. Refer to "Installing the
subwoofer" on page 2 for more information.
Note
• Placing the speakers too close to a CRT-type TV
may impair the picture color or cause a buzzing
noise. In this case, move the speakers at least 20 cm
(8") away from the TV. This is not an issue with LCD
and plasma TVs.
1
En
Contents

Package contents

■ Subwoofer (NS-SW280 x1)
The Subwoofer features a built-in power amplifier and utilizes
Advanced Yamaha Active Servo Technology to provide high-quality
sub-bass sound that adds real "punch" to your home theater.
■ Front and surround speakers (NS-B285 x4),
center speaker (NS-C385 x1)
The front and surround speakers are full-range acoustic-suspension
speakers. The center speaker is a 2-way acoustic suspension speaker.
Non-skid pads: When placing
the center speaker on a flat
surface, affix the included
non-skid pads to the corners
of the speaker undersides, as
shown. The pads will prevent
the speaker from moving
around.
Installing the speakers
Connecting the speakers .................................. 3
Connection diagram.............................................3
Connecting the power cables ..............................4
Using the Subwoofer ......................................... 4
Setting the subwoofer volume .............................4
Frequency characteristics.....................................5
Troubleshooting ................................................. 5
Specifications...................................................... 6
Speaker stand x4
(See page 2)
Non-skid pads (4 pcs.) x1
(For the center speaker)
Subwoofer cable
5 m (16 ft.) x1
•
Front
left
Surround
left
Screw x4
(For Speaker stand)
Speaker cable 25 m (82 ft.) x1
(To be cut into 5 lengths for the
front, center, and surround
speakers. Take care to prevent
injury when preparing the cables.)
Front
right
Center
Subwoofer
Surround
right