Dolmar TM-98.14 H2D Manuel D'utilisation page 92

6
EN
1.3 SAFETY LABELS
Your machine must be used with care. This is why labels with illustrations have been
placed on the machine, to remind you of the main precautions to take during use.
These labels are to be considered an integral part of the machine.
Should a label come off or become illegible, contact your dealer to replace it. Their
meaning is explained below.
1
Warning: Read the instruc-
tions before operating this
machine.
2
Warning: Disconnect the igni-
tion key and read the instructions
before carrying out any repair or
maintenance work.
3
Danger! Ejected objects: Do
not operate without the stone-
guard in place.
4
Danger! Ejected objects:
Keep bystanders away.
5
Danger! Machine rollover: Do
not use this machine on slopes
steeper then 10°.
6
Danger! Dismemberment: Make sure that children stay
clear of the machine at all time when engine is running.
7
Danger of cutting yourself. Blades in movement. Do not
put hands or feet near or under the opening of the cutting plate.
1.4 REGULATIONS FOR TOWING
A kit for towing a small trailer is available on request.
This accessory is to be fitted following the instructions provid-
ed. When using the towing kit, do not exceed the recommend-
ed loads stated on the label and follow the safety instructions
( 1.2, C-6).
1
3
5
SAFETY
2
4
6
7
max 245 N (25 kg)