Dolmar TM-98.14 H2D Manuel D'utilisation page 123

MAINTENANCE
6.5.2 Dismantling, replacing and remounting the blades
WARNING!
!
gloves when handling the blades.
WARNING!
!
blades must always be replaced;
never try to repair them! ALWAYS
USE ORIGINAL BLADES BEARING
THE SYMBOL
blades are correctly balanced.
1. Dismantling
To remove a blade, hold it firmly and undo
the central bolt (1) in the direction indicat-
ed by the arrow.
2. Remounting
Check that the concave part of the cush-
ion disc (3) presses against the blade.
Remount the shaft hubs (4), making sure
that the keys (5) are securely lodged in
place.
3. Tightening the screws
With a torque wrench calibrated to 40-
45 Nm tighten the fixing screws (1).
Always wear work
Damaged or bent
! Make sure the
1
2
2
1
3
1
EN
1
2
2
1
5
3
1
37
4