Dolmar TM-98.14 H2D Manuel D'utilisation page 121

MAINTENANCE
6.4.4 Replacing a fuse
The machine is fitted with fuses (1) with
different capacities and functions. Specifi-
cally:
– 10 A fuse = protects the main and
power circuits of the electronic circuit
board. When it blows, the machine
stops and the dashboard light switches
off.
– 25 A fuse = protects the battery charger
circuit. When it blows, the battery grad-
ually runs out and the machine will have
problems starting.
The fuse capacity is indicated on the fuse.
IMPORTANT
always be replaced by one of the same
type and ampere rating, and never with
one of another rating.
If problems persist, contact Your Dealer.
A blown fuse must
1
35
EN
1