Moving Recorded Tracks (Move Function); Labeling Recordings (Title Function) - Sony MDS-JA30ES Mode D'emploi

5
Turn AMS to select the second track of the two to
be combined and press YES or AMS.
"Complete!!" appears for a few seconds and the
total number of tracks in the music calendar
decreases by one.
If both of the combined tracks have track titles, the
title of the second track is erased.
To cancel the Combine Function
Press EDIT/NO or p.
z
You can undo the Combine Function
Divide the tracks again (see "Dividing Recorded
Tracks" on page 31), then repeat the combine function
with the correct tracks if necessary.
Note
If "Impossible" appears in the display, the tracks cannot be
combined. This sometimes happens when you've edited the
same track many times, and is due to a technical limitation
of the MD system, not a mechanical error.
Moving Recorded Tracks
(Move Function)
Use the Move Function to change the order of any
track. After you move a track, the track numbers
between the new and old track positions are
automatically renumbered.
Example: Moving track C to track position 2
Track
1 2
number
A B
Moving
1
2
A C
EDIT/NO
POWER
g
TIMER
REC OFF PLAY
SCROLL/ DISPLAY/
INPUT FILTER CLOCK SET CHAR
PHONES PHONE LEVEL
OPT2 OPT1 COAX
•
ANALOG
PLAY MODE REPEAT TIME
0 10
1
While the deck is stopped, playing, or pausing,
press EDIT/NO.
2
Turn AMS until "Move ?" appears in the display.
4
3
C D
Track C moves to
track position 2
4
3
B D
YES
≠ ±
EDIT/ AMS DIGITAL REC LEVEL ANALOG
NO YES 0 5
4 6
3 7
0 )
2 8
1 9
+
– 0 10
PUSH ENTER L R
§ ( P p r
OPEN/CLOSE REC
≠ AMS ±
Editing Recorded MDs
3
Press AMS.
4
Turn AMS to select the track to be moved and
press AMS.
5
Turn AMS until the new track position appears.
3
Track number New track
to be moved position
6
Press YES or AMS.
"Complete!!" appears for a few seconds and the
moved track begins playing back if the deck is in
playback mode.
To cancel the Move Function
Press EDIT/NO or p.
Labeling Recordings
(Title Function)
You can create titles for your recorded MDs and tracks.
Titles — which may consist of uppercase and
lowercase letters, numbers and symbols for a
maximum of about 1,700 characters per disc — appear
in the display during MD operation. You can label a
track or an MD by using the controls on the deck or on
the remote.
EDIT/NO
POWER
g
TIMER
REC OFF PLAY
SCROLL/ DISPLAY/
INPUT FILTER CLOCK SET CHAR
PHONES PHONE LEVEL
OPT1 COAX
OPT2 •
ANALOG
PLAY MODE REPEAT TIME
0 10
0/)
DISPLAY/CHAR
Use the following procedure to label a track or an MD.
You can label a track while it is playing, pausing or
recording. If the track is playing or recording, be
sure to finish labeling before the track ends. If the
track ends before you've completed the labeling
procedure, the characters already entered are not
recorded and the track will remain unlabeled.
1
Press EDIT/NO.
2
Turn AMS until "Name ?" appears in the display
and press AMS.
1
YES
≠ ±
EDIT/ AMS DIGITAL REC LEVEL ANALOG
NO YES 0 5
4 6
3 7
0 ) 2 8
1 9
+
– 0 10
PUSH ENTER L R
§ ( P p r
OPEN/CLOSE REC
≠ AMS ±
(Continued)
33 EN