Fading In And Out (Fader) - Sony MDS-JA30ES Mode D'emploi

Recording on MDs
Fading In and Out (Fader) Z
You can gradually increase the recording level at the
beginning of a recording (fade in) or gradually
decrease the recording level at the end of a recording
(fade out).
This function is convenient when, for example, you
don't want the track cut off abruptly when the disc
reaches to its end.
You can perform fade-in and fade-out recording only
during digital recording.
Fade-in recording
During recording pause, press FADE at the position
where you want to start fade-in recording.
"FADE IN" flashes in the display and the deck
performs the fade-in recording until the counter
reaches "0.0s."
Fade-out recording
During recording, press FADE at the position where
you want to start fade-out recording.
"FADE OUT" flashes in the display and the deck
performs the fade-out recording until the counter
reaches "0.0s."
The deck changes to recording pause when fade-out
recording finishes.
18 EN
POWER
OPEN/CLOSE
6
EDIT/NO YES
DISPLAY SCROLL TIME D.O BIT FILTER
PLAY MODE DATE
CONTINUE SHUFFLE PROGRAM RECORDED PRESENT
A B C D E
1 2 3 4 5
F G H I J
6 7 8 9 10
K L M N O
11 12 13 14 15
P Q R S T
16 17 18 19 20
U V W X Y
21 22 23 24 25
Z – . ,
REPEAT A˜B A.SPACE M.SCAN
>
/ 25 ? ! ( )
WRITE CLEAR P. HOLD
NAME CHAR NUM
·
P p
= + r
T.REC MUSIC SYNC
0 )
CD-SYNC
STOP START STANDBY NO CLIP
CD PLAYER FADE FADE
P = +
DIGITAL REC LEVEL
z
You can set the duration of fade-in and fade-out
recording independently
1 While the deck is stopped, press EDIT/NO twice.
2 To set the duration of fade-in recording:
Turn AMS to display the S14 menu, then press AMS.
To set the duration of fade-out recording:
Turn AMS to display the S15 menu, then press AMS.
3 Turn AMS to set the duration.
Both the fade-in and fade-out recording durations
can be set within the following range:
1.0 to 3.0 seconds (in 0.2 second steps)
3.0 to 5.0 seconds (in 0.4 second steps)
5.0 to 15.0 seconds (in 1 second steps)
4 After selecting the duration, press AMS.
5 Press EDIT/NO.
z
You can select the type of increment/decrement curve
for fade-in/fade-out recording
1 While the deck is stopped, press EDIT/NO twice.
2 To select the curve for fade-in recording:
Turn AMS to display the S16 menu, then press AMS.
To select the curve for fade-out recording:
Turn AMS to display the S17 menu, then press AMS.
3 Turn AMS to select "FadeIn (Out) Lin", "FadeIn
(Out) Sin", or "FadeIn (Out) Log", then press AMS.
4 Press EDIT/NO.