Error Codes - Panasonic KY-T936SL Mode D'emploi

Error Codes

Heating automatically resumes if the causes of the following error are eliminated
within 1 minute.
Indication Possible cause
Cookware not detected
■ No pan placed on the cooking zone.
■ The pan has been removed.
■ The pan is not in the correct position. (See page 14)
■ An incompatible pan is used. (See page 15)
Small object on the cooking zone
■ Small metal objects (e.g. cutlery, utensils) are placed
on the cooking zone.
If the above conditions are not rectified, the display and
the main power will turn off.
The following errors can be cleared by turning off the corresponding cooking zone.
Indication Possible cause
The intake or exhaust vent are blocked. (See page 42)
Remove any blockages.
Empty pan on the cooking zone
■ An empty pan has been heated.
■ When deep/shallow frying, oil was preheated by
Heating Mode instead of Deep/Shallow Frying Mode.
Use Deep/Shallow Frying Mode for heating up
a large amount of oil.
■ Incompatible cookware is used for Deep/Shallow
Frying Mode. (See page 15)
■ The pan is not in the correct position. (See page 14)
■ More than 800 g of oil has been heated up.
■ Ingredients were added while preheating.
36
EN-
Error Codes
If you cannot resolve the problems, or any
centre.
Turn off the main power switch and the circuit breaker. Contact the dealer you
purchased the appliance from or the service centre for assistance.
NOTE
■ During the warranty period, any repairs may only be performed by
service technicians authorised by the appliance manufacturer.
■ Unauthorised repairs may cause electric shock and short circuit; do
not attempt this yourself. Consult an authorised service technician.
■ Warranty claims that resulted from improper connection or use of the
appliance is not covered by the warranty. In such cases, the costs of
repair are borne by the user.
■ For the list of service centres, refer to the guarantee booklet.
error appears, contact the service
37
EN-