Interfaces Routables Layer 3 Switch - Siemens RST916C Manuel De Configuration

Simatic net ruggedcom ros v5.5
Masquer les pouces Voir aussi pour RST916C:
Table des Matières

Publicité

Layer 3 (couche 3)
8.1.1 Comprendre la commutation de couche 3 (Layer 3 Switching)
8.1.1.6

Interfaces routables Layer 3 Switch

RUGGEDCOM ROS permet la configuration d'un maximum de 255 interfaces (VLANs).
Pour rendre une interface routable pour le trafic IPv4 en monodiffusion, une adresse
IPv4 doit être configurée de façon statique ou affectée via DHCP à l'interface. Pour
plus d'informations, voir
188
YES
YES
Is the ARP entry resolved?
YES
YES
Layer 3 rule is active.
Layer 3 switching is working.
"Gestion d'interfaces IP (Page
For each Layer 3 rule
in the Rule Summary Table:
Does a Layer 3 ARP entry
exist for that host/gateway?
NO
Create a dynamic ARP entry
in the Layer 3 ARP Table.
NO
Layer 3 rule is resolving.
82)".
Manuel de configuration, 01/2021, C79000-G8977-1486-01
RUGGEDCOM ROS v5.5

Publicité

Table des Matières
loading

Table des Matières