Installing The Lcd Monitor - Dometic M55LAHD Instructions De Montage Et De Service

Installing the LCD monitor

7 Installing the LCD monitor
Tools required (fig. 1, page 2)
7.1
For installation and assembly you will need the following tools:
•
Measuring ruler (4)
•
Centre punch (5)
•
Hammer (6)
•
Drill head set (7)
•
Drill (8)
•
Screwdriver (9)
To establish and test the electrical connection, the following tools are required:
•
Diode test lamp (1) or voltmeter (2)
•
Insulating tape (10)
•
Heat shrinking sleeve
•
Hot air blower (11)
•
Crimping tool (12)
•
Soldering iron (optional) (13)
•
Solder (optional) (14)
•
Cable bushing sleeves (optional)
To fasten the cables you may require additional cable binders.
14
M55L AHD, M75L AHD
EN