Pioneer DMH-100BT Mode D'emploi page 16

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Menu Item
Description
1
[Touch Panel Calibration]
Touch [Yes].
2
Touch four corners of the screen along the arrows.
3
Press
The adjustment results are saved.
4
Press
Proceed to 16-point adjustment.
5
Gently touch the center of the [+] mark displayed on
the screen.
The target indicates the order.
6
Press and hold
The adjustment results are saved.
[Dimmer Settings]
Menu Item
Description
[Dimmer Trigger]
Setting the dimmer brightness.
[Auto]
Switches the dimmer to on or off automatically according
to your vehicle's headlight turning on or off.
[Manual]
Switches the dimmer to on or off manually.
[Time]
Switches the dimmer to on or off at the time you adjusted.
[Day/Night]
Setting the dimmer duration by day or night.
You can use this function when [Manual] is set to [Dimmer
Trigger].
[Day]
Turns the dimmer function to off.
[Night]
Turns the dimmer function to on.
16
En
.
once again.
• When you press
, the previous adjustment
position returns.
• When you press and hold
, the adjustment is
canceled.
.
Menu Item
Description
[Dimmer Duration]
Adjust the time that the dimmer is turned on or off by
dragging the cursors or touching
You can use this function when [Dimmer Trigger] is set to
[Time].
TIPS
• Each touch of
in the 15 minute width.
• When the cursors are placed on the same point, the dimmer
available time is 0 hours.
• When the cursor for off time setting is placed on the left end and
the cursor for on time setting is placed on the right end, the
dimmer available time is 0 hours.
• When the cursor for on time setting is placed on the left end and
the cursor for off time setting is placed on the right end, the
dimmer available time is 24 hours.
NOTES
• The time display of the dimmer duration adjusting bar depends
on the clock display setting (page 19).
• This setting is available only when you stop your vehicle in a safe
place and apply the parking brake.
[Picture Adjustment]
You can adjust the picture for each source and rear view camera.
CAUTION
For safety reasons, you cannot use some of these functions while your vehicle is in motion. To enable
these functions, you must stop in a safe place and apply the parking brake.
To adjust following menu, touch
,
Menu Item
Description
[Brightness]
Adjust the black intensity.
[-24] to [+24]
[Contrast]
Adjust the contrast.
[-24] to [+24]
[Color]*
Adjust the color saturation.
[-24] to [+24]
[Hue]*
Adjust the tone of color (which color is emphasized, red, or
[-24] to [+24]
green).
[Dimmer]
Adjust the brightness of the display.
[+1] to [+48]
or
.
or
moves the cursor backward or forward
,
,
to adjust.

Publicité

Table des Matières
loading

Table des Matières