Pioneer AVH-X5600BT Manuel D'installation page 5

Connecting the units
When connecting with a rear
view camera
When the shift lever is switched to REVERSE
(R), the display on this unit automatically
switches to the rear view image. You need to set
the Camera Polarity properly in the system
menu.
You can also switch the rear view image by
pressing the touch panel key.
For details, refer to operation manual.
WARNING
USE INPUT ONLY FOR REVERSE OR MIR-
ROR IMAGE REAR VIEW CAMERA. OTHER
USE MAY RESULT IN INJURY OR DAM-
AGE.
CAUTION
! You must use a camera which outputs
mirror reversed images.
! The screen image may appear reversed.
! The rear view camera function is to be used
as an aid to keep an eye on trailers, or while
backing up. Do not use for entertainment
purposes.
! Objects in the rear view may appear closer or
more distant than they actually are.
Rear view camera input (R.C IN)
This product
RCA cable
(sold separately)
To video output
Rear view camera
Violet/white
(sold separately)
Of the two lead wires
connected to the back lamp,
connect the one in which the
voltage changes when the
gear shift is in the REVERSE
(R) position. This connection
enables the unit to
sense whether the car is
moving forwards or
backwards.
Connecting the units
iPod with lightning connector
When connecting with optional
CD-IU52 cable
USB/iPod input
This product
USB cable
(Supplied with this unit)
Connect to separately sold
USB device.
Lightning to USB Cable
(CD-IU52) (sold separately)
iPod with lightning
connector
(sold separately)
When connecting with optional
CD-IV203 cable
This product
USB/iPod input
RGB input
RGB to VGA Cable
(CD-IV203) (sold separately)
USB cable
(Supplied with this unit)
Connect to separately sold
USB device.
Lightning to USB Cable
(CD-IV203) (sold separately)
Lightning to VGA Adapter
(Apple Inc. products)
(sold separately)
iPod with lightning connector
(sold separately)
Section
01
5
En