Pioneer AVH-X5600BT Manuel D'installation page 4

Section
01 Connecting the units
When connecting to separately sold power amp
Rear output
Front output
This product
Subwoofer
output
Blue/white
Connect to system control
terminal of the power amp
(max. 300 mA 12 V DC).
Blue/white (5*)
The pin position of the ISO connector will differ
depending of the type of vehicle. Connect 5* and
6* when Pin 5 is an antenna control type. In
another type of vehicle, never connect 5* and 6*.
Perform these connections when
using the optional amplifier.
4
En
Power amp
(sold separately)
To front output
Power amp
(sold separately)
To rear output
Power amp
(sold separately)
To subwoofer
output
Connect with RCA cables
(sold separately)
System remote control
Blue/white (6*)
Connect to auto-antenna
relay control terminal
(max. 300 mA 12 V DC).
Left Right
Subwoofer Subwoofer
Rear speaker Rear speaker
Front speaker Front speaker
Connecting the units
When connecting the external video component and the display
Audio inputs
(R IN, L IN)
This product
Video input (V IN)
Rear monitor output
(V OUT)
! It is necessary to change AV Input in the
system menu when connecting the external
video component.
This product's rear video output is for connec-
tion of a display to enable passengers in the rear
seats to watch the DVD, etc.
WARNING
Never install a rear display in a location that is
visible to the driver while the vehicle is in mo-
tion.
External video component
(sold separately)
To video
output
To audio outputs
RCA cables
(sold separately)
To video
input
Display with RCA input
jacks (sold separately)