SEVERIN DT 8760 Mode D'emploi page 26

6. Tilt the device backwards slightly and
remove the screws supporting the lower
door hinge. Unscrew the adjustable
stands and the possibly adjacent screws
from the unit and screw them on the
other side.
7. Unscrew the plastic plug and the screw
on the bottom of the refrigerator door and
replace them on the other side of the
door.
8. Attach the refrigerator door, rotate the
middle door hinge 180 ° and then attach
it on the opposite side of the unit. Attach
the middle door hinge with the corre-
sponding screws.
9. Loosen the plastic plug and the screw on
the bottom of the freezer door and replace
them on the other side of the door.
10. Replace the freezer door and mount the
upper door hinge on the opposite side of
the unit. Secure the upper door hinge
with the corresponding screws.
11. Place the separately enclosed door hinge
cover on the upper door hinge. Place the
plastic cover on the opposite side of the
device.
- 26 -