Publicité
Les langues disponibles
Les langues disponibles
3.
Press the button
4.
Press
or
temperature 5-37°C. These buttons cannot be used if the heater is in
ventilation setting.
NB: When the set temperature is reached, the heating element will be switched
off, the fan will continue to run for another 99 seconds. The dots will start to
blink on the display. When the ambient temperature drops to under the
thermostat temperature, the heater will begin to work again and the dots on
the display will stay on.
5.
Press button
remote control). The display shows EC. The thermostat is set to 16°C. To
switch off the ECO setting, press the
control).
NB: The ECO setting does not work in the ventilation mode.
6.
Only remote control: Press on
7.
Press on the button
8.
The heater continues to cool down for 99 seconds after being switched off. The
display counts the seconds down.
9.
In order to switch the heater off, turn the main switch to O (OFF) and remove
the plug from the socket. Always remove the plug from the socket if the heater
is not in use!
Wifi and App operation
The heater can also be operated using an app. The heater must be connected with a
wifi modem.
1.
Download the Eurom Smart App via the QR-code below or search for "Eurom
Smart" in the APP store or Google play.
2.
Follow the download instructions.
- The Wi-Fi function is switched on as standard.
To turn the Wi-Fi function off, press both the
seconds at the same time. The Wi-Fi lamp will go out.
and the heater will start to oscillate (swivel).
(
or
on the remote control) to set the desired
for 5 seconds for the EC-setting (
to stop the heater.
or
(
to switch off the 3-colour LED ring.
and the
35
on the
or
on the remote
buttons for 5
Publicité
