Instructions For Use - Mesto 3237P Mode D'emploi

Masquer les pouces Voir aussi pour 3237P:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20
EN
+
You will find the illustrations referred to above in the pages 3 – 5 of these

instructions for use.

Scope of delivery
Tank [1] with pump [2], hose [3] with discharge filter [6], shut-off valve [4], instructions
for use [5], carrying strap [7] and spray wand [8], elbow [22], cap nut [9]. (Fig. 1)
Technical data
Type of device
Max. filling amount
Total contents
Max. spraying pressure
Max. operating temperature
Weight when empty / Gross weight max. 1.7 / 6.7 kg (3.8 / 14.8 lb) 2.9 / 10,9 kg (6.4 / 24 lb)
Material of tank
Spray wand
Where device is carried
Technical residual quantity
Max. volume flow
Recoil force
Table 1
Assembly
1. Fasten the carrying strap [7] on the tank [1] (Fig. 2)
2. Push the hose [3] with the discharge filter [6] into the tank and secure it with the cap nut
[9]. (Fig. 3)
3. Push the tube [3] into the shut-off valve [4] and secure it with the cap nut [9]. (Fig. 3)
4. Screw the spray wand [8] onto the shut-off valve [4] (Fig. 3)
5. Srew the elbow [22] onto the spray wand [8] (Fig. 3)
Checks
Visual inspection: Are tank [1], pump [2], hose [3], shut-off valve [4] and spray wand [8]
with elbow [22] and nozzle [16] undamaged? (Figures 1, 3, 18)
+
Pay special attention to the connections between the tank – hose and the hose –
shut-off valve and to the condition of the pump threading and spray wand.
No leaks: Pump up the empty device to 2 bar (Fig. 10).
► The pressure must not decrease more than 0.5 bar within 30 minutes.
Function: Pull up the piston pressure gauge [10] (Fig. 4)
► The pressure must dissipate.
+
Using the lock [40] the lever on the shut-off valve [4] can be locked and unlocked.
Unintentional spraying is prevented after locking. (Fig. 12)
► If required, reset the lock [40] and activate the shut-off valve [4]. (Fig. 12)
► The shut-off valve must open and close.
Have damaged parts or parts that do not work properly repaired immediately by our
customer service department or by service partners authorized by us.
3237FP
3237P
5 l (1.1 gal)
6.9 l (1.5 gal)
3 bar (43.5 psi)
30 °C (86 °F)
polyethylene
brass
on the side
< 0.04 l (< 0.01 gal)
1.0 l/min (0.22 gal/min)
15
ENGLISH
3278P
8 l (1.8 gal)
10 l (2.2 gal)
40 °C (104 °F)
plastic
< 5 N

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

3278p3237fp

Table des Matières