Publicité
Les langues disponibles
Les langues disponibles
S
Replace the battery cover.
2. Power Adapter Connecting
Only use CE certificated adapter
S
Plug power adapter (included) to the DC 9V Jack of "baby unit"
and AC outlet (Fig. III )
S
For a long term usage at a fix location in house of the "parent
unit", you can buy a power adapter (9V DC, 200 mA, female
plug centre negative (−)) to plug the power adapter
(not included) to the DC 9V jack of "parent unit" and AC outlet
(Fig. IV).
S
Set channel selection of "baby unit" and "parent unit" to the
same channel "A" or "B".
S
When the units will not be used for a long time, should
remove all the batteries, otherwise, the battery may leak
and damage the units.
S
Each of the "baby unit" and "parent unit" has a Iow battery
indicator. If the Iow battery LED lights up, please replace
new batteries.
S
The adapter of both units Output DC 9V 200 mA female
plug, centre negative (−) is recommended.
S
If the units are both installed with batteries and connected
adapters. Even AC power failure, the units will continue to
work with batteries.
S
Only Use CE Certificated Power Supply
5 Operation
1. "Baby Unit" (Transmitter)
S
Make sure the AC power adapter is connected or batteries are
installed correctly.
S
Place the "Baby unit" near the baby's bed, making sure that the
microphone is placed in the best position for picking up baby's
sound. (Fig. V)
Ensure the unit to be out of reach from your child. Never
place it inside baby's bed or playpen!
S
Turn the power switch ON and the power indicator LED will
light up. When sound is picked up by the built−in microphone,
the "baby unit" starts transmitting signal automatically to
"parent unit". The transmission will stop when no sound is
picking up any more.
S
Set the night light switch as you want: OFF mode no night light
function; AUTO mode activate by voice; ON mode night light
will continuing light up.
21
Publicité
