Troubleshooting - Poulan Pro PRST15i Manuel D'utilisation

3.
4.
Problem Possible cause
The product The power is off.
does not start
No electrical contact between
the product and battery pack.
The battery pack is not charged. Charge the battery pack. See the operator's manual for the bat-
The battery pack or product are
too hot.
The battery pack or product are
too cold.
Motor controller is too hot.
Error codes
The error codes help you do troubleshooting on the
battery pack and/or the battery charger while it charges.
316 - 002 - 20.11.2017
5.
6.

TROUBLESHOOTING

Possible solution
Start the power. See
Install the battery pack correctly. See
on page 8 .
tery pack.
Let the battery pack and product cool down before you start the
product.
Let the battery pack and product become warm before you start
the product.
Let the battery pack and product cool down for a minimum of 1
hour before you start the product.
Note: Look at the battery state of charge LED with the
ribs of the battery pointed up to see the correct
orientation of the LED lights.
To start the motor on page 8 .
To install the battery pack
11