Publicité
Les langues disponibles
Les langues disponibles
3
Using a spirit level, adjust the appliance so that it is
perfectly level.
4
Screw the appliance into place. Remove
transportation lock from the door.
8
Adjusting the door
For precise alignment, the appliance door can be easily
adjusted.
For this purpose, slightly pull out the appliance from the
built-in cut-out. At the top of the appliance there is an
oval opening located on the hinge side. Remove the
cover cap. Slightly loosen both screws (Inbus 5 mm),
but do not remove them!
Align the door via the lateral screw (Torx 20).
Publicité
