Adjusting Setup Items - Sony CDX-GT30RN Guide Rapide

SET UP RADIO CD

Adjusting setup items

— SET
1
Press and hold the select button.
The setup display appears.
2
Press the select button repeatedly
until the desired item appears.
3
Press the volume control dial to select
the setting (example "ON" or "OFF").
4
Press and hold the select button.
The setup is complete and the display returns
to normal play/reception mode.
Note
Displayed items will differ, depending on the source
and setting.
The following items can be set:
" " indicates the default settings.
z
CLOCK-ADJ (Clock Adjust)
To set the clock.
CT (Clock Time)
To set "CT-ON" or "CT-OFF" (
BEEP
To set "BEEP-ON" (
AUX-A* 1 (AUX Audio)
To turn the AUX source display "AUX-A-ON"
( ) or "AUX-A-OFF."
z
SUB/REAR* 1
To switch the audio output.
– "SUB-OUT" ( ): to output to a subwoofer.
z
– "REAR-OUT": to output to a power amplifier.
DIM (Dimmer)
To change the brightness of the display.
– "DIM-ON": to dim the display.
– "DIM-OFF" ( ): to deactivate the dimmer.
z
ILM-1/ILM-2 (Illumination)
To change the illumination colour: "ILM-1" (
or "ILM-2."
DEMO* 1 (Demonstration)
To set "DEMO-ON" (
A.SCRL (Auto Scroll)
To scroll long displayed item automatically
when the disc/album/group/track is changed.
– "A.SCRL-ON": to scroll.
– "A.SCRL-OFF" (
REG*
2 (Regional)
To set "REG-ON" (
6
GB
).
z
) or "BEEP-OFF."
z
) or "DEMO-OFF."
z
): to not scroll.
z
) or "REG-OFF."
z
LPF*
3 (Low Pass Filter)
To select the subwoofer cut-off frequency:
"LPF OFF" (
z
*1 When the unit is turned off.
*2 When FM is received.
*3 When the audio output is set to "SUB."
)
z
), "LPF125Hz" or "LPF 78Hz."