Adjusting Setup Items - Menu; Receive Mode - Sony CDX-GT820IP Mode D'emploi

Adjusting setup items — MENU
1
Press and hold the select button.
The setup display appears.
2
Rotate the control dial until the
desired menu item appears, then
press the select button.
3
Rotate the control dial to select the
setting, then press the select button.
The setting is complete.
4
Press (BACK).
The display returns to normal play/reception
mode.
The following items can be set (follow the page
reference for details):
" " indicates the default settings.
z
Setup
Clock Adjust (page 5)
Beep
To set "on" ( ) or "off."
z
RM (Rotary Commander)
To change the operative direction of the rotary
commander controls.
– "NORM" ( ): to use the rotary commander in
z
the factory-set position.
– "REV": when you mount the rotary commander
on the right side of the steering column.
AUX Audio
To turn the AUX source display "on" (
"off" (page 17).
Auto Off
To shut off automatically after a desired time
when the unit is turned off: "NO" (
"30 min" or "60 min."
Display
Demo (Demonstration)
To set "on" ( ) or "off."
z
Image
To set various display images.
– "Movie 1 ( ) – 3": to display a movie.
z
– "SA 1 – 3": to display the Spectrum Analyzer.
– "Wall.P 1 – 3": to display a wallpaper.
– "off": to not display any image.
Auto Image
To set various display images.
– "All": to step repeatedly through the display
images in all display modes.
– "Movie" ( ): to display a movie.
z
– "SA": to display the Spectrum Analyzer.
– "off": to not display any image.
16
Info (Information)
To display the items (depending on the source,
etc.).
– "Simple" (
– "All": to display all items.
– "Clear": to have items automatically
disappear.
Dimmer
To change the brightness of the display.
– "Auto" (
when you turn lights on.
– "on": to dim the display.
– "off": to deactivate the dimmer.
Illumination
To change the illumination color: "Blue" (
"Red" or "Green."
Auto Scroll
To scroll long displayed item automatically
when the disc/album/group/track is changed.
– "on" (
– "off": to not scroll.
Local (Local seek mode)
– "off" (
– "on": to only tune into stations with stronger
signals.
Mono*
To improve poor FM reception, select monaural
reception mode.
– "off" (
– "on": to hear stereo broadcasts in monaural.
) or
z
IF
– "Auto" (
reception frequency to eliminate noise.
– "Wide"*
), "30 sec,"
z
broadcasts in stereo and with full the
frequency signal reception.
BTM (page 12)
*1 When FM is received.
*2 In such cases, some FM stereo broadcasts may
become monaural while in the stereo reception
mode.
): to not display any items.
z
): to dim the display automatically
z
): to scroll.
z

Receive Mode

): to tune normal reception.
z
1 (Monaural mode)
): to hear stereo broadcast in stereo.
z
): to narrow automatically the
z
2 : to always hear FM stereo
),
z