Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
14. NEVER use a tool which is defective or operating abnormally.
If the tool appears to be operating unusually, making strange noises, or otherwise
appears defective, stop using it immediately and arrange for repairs by a Hitachi
authorized service center.
15. Carefully handle power tools.
Should a power tool be dropped or struck against hard materials inadvertently, it may
be deformed, cracked, or damaged.
16. Do not wipe plastic parts with solvent.
Solvents such as gasoline, thinner, benzine, carbon tetrachloride and alcohol may
damage and crack plastic parts. Do not wipe them with such solvents.
Wipe plastic parts with a soft cloth lightly dampened with soapy water and dry
thoroughly.
17. ALWAYS wear eye protection that meets the requirement of the latest revision of ANSI
18. Definitions for symbols used on this tool
V ............ volts
— --- ........... direct current
.......... no load speed
n
o
---/min ... revolutions per minute
IMPORTANT SAFETY INSTRUCTIONS
FOR BATTERY CHARGER
1.
This manual contains important safety and operating instructions for battery charger
Model UC3SFL.
2.
Before using battery charger, read all instructions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using battery.
3.
To reduce risk of injury, charge HITACHI rechargeable battery type EBM315. Other type
of batteries may burst causing personal injury and damage.
4.
Do not expose battery charger to rain or snow.
5.
Use of an attachment not recommended or sold by the battery charger manufacturer
may result in a risk of fire, electric shock, or injury to persons.
6.
To reduce risk of damage to electric plug and cord, pull by plug when disconnecting
battery charger.
7.
Make sure cord is located so that it will not be stepped on, tripped over, or otherwise
subjected to damage or stress.
Standard Z87.1.
English
7
Publicité
Table des Matières
