Test; Temperature Control - AYA ART0802A+ Manuel D'utilisation

TEST

Clean the parts of the refrigerator with lukewarm water on a soft
cloth or with a neutral detergent and with clear water, then wipe
them dry.
Notes: Electric parts of the refrigerator can only be wiped by
dry cloth.
Turn the thermostat knob on the "3" position and turn on
electricity. The compressor begins to work.
Close the door and wait 30 minutes. If the temperature in the
freezer compartment decreased obviously, it shows that the
refrigerator system works well. When the refrigerator operates
for a period of time, the temperature controller will automatically
set the temperature on conditions that the door is not too often
opened.
If the above steps are successful, the trial operations are
finished. The refrigerator works normally.

TEMPERATURE CONTROL

The fridge is controlled with a temperature control knob located
inside it, towards the upper right‐hand corner.
Adjust the control knob as desired to suit your individual
preference.
0=off setting
1=cold setting
7=coldest setting
In the off position (0) the appliance does not operate (the
·
cooling system is switched off), but power supply is not
interrupted.
The running time and temperature are affected by where the
·
fridge is located, how often the door is opened and the
temperature of the room the fridge is located in.
-41-