Nextview - Sony Trinitron KV-34FQ75 D Mode D'emploi

Operation

NexTView

Using the 'Long Info' menu
With this 'Long Info' menu screen, you can set timers or record selected programmes.
1. Press v or V to select a future programme in the programme list column.
2. Press the OK button to display the 'Long Info' menu on the TV screen.
To set the timer
Press the b or B buttons to highlight the
you choose to set the timer, the programme is marked with a clock symbol and a message appears on the screen shortly before
the programme is due to start asking whether you wish to still view this programme.
To view the timer table
Press the b or B buttons to highlight the
shows the programmes on which you have already set a timer. (You can set a timer on up to 5 programmes).
To record programmes*
* (only with Smartlink VCRs)
1. Connect your Smartlink VCR to the AV2 socket on your TV.
2. Press b or B to select
3. To set up the VCR:
VPS/PDC
Press b to select VPS/PDC then press the OK button repeatedly to select 'On' or 'Off'. With this setting on you have the
guaranteed recording of the whole broadcast should there be a change in the TV programme. This only works if the selected
channel broadcasts a VPS/PDC signal.
Speed
Press V to select 'Speed' then press the OK button repeatedly to select between 'SP' for standard play or 'LP' for longplay.
With longplay you can record twice as much on a videotape. The picture quality however may suffer.
VCR Setup
Press V to select 'VCR Setup' then press the OK button repeatedly to select which VCR you wish to programme, namely
'VCR1' or 'VCR2'.
4. Finally, press B to select the
icon then press the OK button repeatedly to 'set the timer' or 'cancel the timer'. If
icon then press the OK button repeatedly to switch on/off the timer table. This table
First nextTView/EPG-Providers in Europe
07 Tue
SWISS TXT
12:38
Address Mapping
The position of the addresses in the
OSDA is shown in the following diagram.
The position values of the DPW are set
to '0'.
If other values are set, the complete
combination will be scrolled.
Example:
if the DPWC is set to '63', the char-
This channel has been set for a timer
VPS/PDC On
Speed SP
Timer Prog VCR1
then press the OK button to download the information to your VCR.
icon then press the OK button to remove the menu from the TV screen.
TPS / RINGIER nexTView
Tue 07. 04 .98
9