Publicité
Les langues disponibles
Les langues disponibles
Dimensions and weight:
Lola 3
Width 235mm
•
Height 435mm (+40mm con porta
•
pubblicità)
Depth 280mm
•
Lola 6
Width 270mm
•
Height 465mm (+40mm con porta
•
pubblicità)
Depth 320mm
•
Noise emissions
The continuous, equivalent, weighted level of
acoustic pressure is below 70 dB.
In the event of breakdown:
In most cases, any technical problem can be
settled with slight interventions (please see the
troubleshooting
guide
manual); we therefore recommend you to
carefully read this handbook before contacting
the manufacturer or service centre.
Disposal
All the parts of the packaging must be kept
beyond the range of children, as they might
represent a potential safety/health risk.
Important
In respect of the environment, please dispose
the packaging as illustrated.
This symbol:
cannot be disposed as common waste. It must
be handled in compliance with the provisions of
European
directive
Electrical and Electronic Devices - WEEE) and
the resulting national legislation, in order to
prevent
any
potential
environment and to create health risks.
In order to correctly dispose of the device,
please contact the distributor from which you
purchased it or our after-sales service.
Data di emissione: September, 2018
at
the
end
Caution
means that the machine
2003/108/EC
damage
4. POSITIONING
FOR MAINTENANCE WORKER ONLY
The installation and subsequent servicing
operations must be carried out by skilled
members who have been trained to use the
device
and
regulations in force.
a) Remove the packing and preserve it in order
to reuse for winter storage.
All the parts of the packaging must be kept
beyond the range of children, as they might
represent a potential safety/health risk.
b) Make
condition.
of
this
b) Rest the machine on a sturdy, horizontal
surface making sure it is well ventilated by
leaving a gap of 20 cm around it and do not
install
it
recommend
temperature between 24 and 30°C.
c) Check that the power mains voltage meets
the
specifications
identification plate and that the output available
meets the device's power requirements.
Fit the plug into an earthed socket, removing all
multiple adaptors.
FOR FURTHER PRECAUTIONS, READ THE
SECTION "CONNECTION TO THE ELECTRICITY
d) The installation must be carried out in
accordance with the manufacturer's instructions.
Failure to comply with the positioning and
installation
machine's operation.
(Waste
You are legally required to provide a suitable
grounding system for the equipment.
to
the
Before carrying out any cleaning and/or special
maintenance on the device, make sure it is
disconnected from the mains by unplugging it.
In the event of a breakdown or malfunctioning,
switch off the device and remove the plug.
Revisione: 1
in
compliance
Caution
sure
the
machine
near
heat
sources
you
to
maintain
on
MAINS" CAREFULLY.
instructions
may
Important
Pag. : 17/40
with
the
is
in
perfect
(fig.1);
we
a
room
the
equipment
impair
the
Publicité
Chapitres
