Functional Overview; Control Panel - Furrion DV1230 Manuel D'instructions

Functional Overview

Control Panel

1
Turn on the unit or switch to
standby mode.
2
Eject the loaded disc.
3 ZONE 1/ZONE 2/ ZONE 3
Turn on or off the audio source in
each of the different areas where your
speakers are connected.
Number buttons (1 - 6)
4
Select and enter numbers.
1/MENU: Display the title list during
DVD/VCD playback.
3/RDM: Select random playback mode.
4/RPT: Select repeat playback mode.
5 Disc slot
6 SEL
EQ
Select various system settings.
Select a preset sound effect.
Source buttons
7
Select the corresponding sound source:
DISC/USB, AM/FM, BT, or AUX.
NFC detection area
8
LCD screen
9
IR sensor for remote control
10
7
AUX socket
11
Connect to the 3.5mm audio output
socket on an auxiliary device.
socket
12
Connect a headphone.
HDMI IN socket
13
Connect to the HDMI output socket on
an AV device.
14
Enter alarm setting mode.
USB socket
15
Connect a USB storage device.
RESET
16
Reset the unit and load its factory
default settings.
MIC
17
Built-in microphone.
/ OK
18
Adjust brightness of the LCD screen.
Confirm your selection.
19
Mute or un-mute the audio output.
20
Stop playback.