Prepare The Remote Control - Furrion DV1230 Manuel D'instructions

Before Operation

Prepare the Remote Control

1. Before using the remote control for the first
time, pull the insulating sheet out of the
remote control in the direction indicated by
the arrow. (Fig.1)
Fig. 1
2. Press the movable block hold in the
direction indicated by arrow A (Fig.2), then
pull the battery holder out of the remote
control as the direction indicated by arrow
B. (Fig.2)
Fig. 2
3. Replace the old battery with a new one, with
the (+) polarity side upward. (Fig.3)
4. Insert the battery holder into the original
position in the remote control. (Fig.3)
Fig. 3
Remote control battery note
1. Improper use of a battery may cause
overheating or an explosion that could result
in injury or fire.
2. Battery leakage may cause damage to the
remote control. Battery Life: 6 months with
normal use in normal room temperature.
3. Do not short the battery.
4. Do not throw the battery into fire.
5. To avoid the risk of accident, keep the
battery out of reach of children.
side up
14