Furrion DV1230 Manuel D'instructions page 35

Troubleshooting
TROUBLE/SYMPTOM
Remote control does
not work
Some function buttons
do not work
The radio does not
work
Functions locked
or no response for
Bluetooth function
Check the battery of the remote control and make sure that it is not dead.
Direct the remote control to the IR sensor of the unit.
Check whether there are obstacles between the remote control and IR sensor.
Turn off the power, then turn on again.
Reset the unit, then turn on again.
Remove the front panel from the unit, then put it back and turn on again.
Check whether the antenna cable is connected firmly, or manually tune for a
station.
Press RESET with a sharp object such as a clip to reset the unit and load its
factory default settings.
SOLUTION
34