Control Panel - Appliance With Mechanical Regulation; Refrigerator Accessories - Pelgrim PKS 3122F/P01 Notice D'utilisation

Control panel - appliance with mechanical regulation

ON/OFF button ON/OFF button

Refrigerator accessories

Shelf Shelf
Adjustable glass shelf Adjustable glass shelf
The appliance is switched on/off by turning the temperature
selector (see Fig.) to any position from 0 to 7.
The appliance operation is controlled by turning the thermostat
(temperature selecting button) located within the refrigerator
cabinet from the position STOP (0) to the position 7 and back.
Temperature setting
• The higher the position of the temperature selector (towards
position 7) the lower is the temperature (cooler) within the cabinet
of the appliance. Interior temperature in the refrigerator may even
fall below 0°C. Higher position settings are to be used on in case
of recommended low cooling temperature. In case of standard
ambient temperature we recommend the medium setting.
• Change in the ambient temperature affects the temperature of
the appliance, so the position of the temperature selector should
be adjusted accordingly.
• In the STOP (0) position the appliance is switched off (cooling
system is off). However, the appliance is still powered (light bulb
is turned on if you open the refrigerator door).
(Equipment depends on the model)
• Shelves can be optionally placed on the guides inside the
appliance. To remove the shelf, fi rst slide it out as far as the
guide allows it, then slightly lift it up and pull it out. Quickly
perishable food should be stored on the back i.e. the coldest
part of the shelves.
If you need space to store higher objects (bottles, jars, jugs)
in the refrigerator you can remove the front part of the shelf,
relocate it to a lower level, and obtain the required space.
23