Pelgrim PKS 3122F/P01 Notice D'utilisation page 22

Refrigerator temperature Refrigerator temperature
setting setting
Start of fan assisted Start of fan assisted
cooling cooling
(control panel 1) (control panel 1)
Open refrigerator door Open refrigerator door
alarm alarm
22
• Temperature of the appliance is set by turning the button (B) to
the position between the Min and Max span.
• Recommended setting of the thermostat knob is to ECO
position.
• In case of exceptionally higher ambient temperatures it is
recommended to switch the fan operation at high speed by
pressing button (D) – only for models featuring control panel 1.
• SF/SC position
- SF position stands for "Super frost" and indicates fast
freezing (certain models only).
- SC position stands for "Super cool" and indicates fast
cooling (certain models only).
• In apliances with digital display the indicator fl ashes during the setting
procedure, and the beep signals each change of preset temperature.
When fl ashing stops the fi nal setting is stored in memory.
• When the appliance is switched on, the display (A) will fl ash
for a few seconds – the set value will be indicated. After a
while, the actual or maximum value is indicated. This value
will remain on the display until the actual temperature in the
refrigerator compartment falls below the displayed level.
Fan assisted fast cooling is started by pressing the button (D).
Orange LED is on. Fan eliminates minor temperature differences
between different cabinet spaces, and reduces dew formation on
the interior surface of the appliance.
The alarm sounds if the refrigerator door is left open for more
than 1 minute. When the door is closed again the alarm stops.