Control Panel - Pelgrim SBS090A Notice D'utilisation

Control Panel

en
The no frost system becomes active as soon as
the refrigerator is turned on. This system prevents
unwanted ice forming, which means you do not have to
defrost your freezer.
The active cooling system becomes active as soon
as the refrigerator is turned on. The intelligent control
system provides maximum cooling.
After 6 month of first power input, "FILTER
CHANGE" icon is ON.
When the time comes to change the filter or reset
push "RESET WATER FILTER" button for 5 seconds
after change, then "FILTER CHANGE" icon is OFF.
Children may push any button on the panel for fun,
resulting in disorder of temperature and function of
refrigerator.
- Press this button to lock out this possibility and to
keep temperature and function setting.
- Push Lock button again for more than a second to
stop it.
Note
Interior lights of refrigerator turn off when the doors are open for more than 10 minutes.
In case either freezer or refrigerator door is open for more than a minute, door alarm rings for
5 minutes with 1 minute interval.
For your convenience you can select WATER /
CUBED ICE or CRUSHED ICE.
A rectangle line around the icon lights up to indicate
your selection is ON.
To obtain the water or ice, push the pad smoothly
with your cup and your selection will come out 1~2
seconds later.
- Wait 2~3 seconds after pushing the pad to get all
the available water or ice cubes.
- Try to avoid placing the rim of your glass near the
bottom of the pad, otherwise Water or Icecubes
may spill or splash.
- You will hear a snap sound 2 seconds after the
icecubes come out. This is from the shut off ice-out
valve.
When cleaning the icecubes case assembly or when
you do not use for a long period of time, remove the
icecubes in the ice storage case and press the button
to stop making icecubes.
28