Measuring And Transferring Blood Pressure - Bosch+Sohn boso medicus system Mode D'emploi

Measuring and transferring blood pressure

Now put on the cuff and carry out
a blood pressure measurement as
described in the user instructions.
As long as Bluetooth is active and
the app is running, the measured
values are automatically transfer-
red after the blood pressure mea-
surement has been completed.
After successful transfer, the mea-
surement value is deleted from the
measurement value memory of the
blood pressure monitor.
Repeat the pairing process if the
measurement data have not been
transferred. If the app or Bluetooth
are inactive, up to 30 measurement
values are automatically saved in
the blood pressure monitor (If the
measurement value memory of 30
measurements is full, the oldest
measurement is deleted and the
current measurement is saved.
Faulty measurements are not
saved) and sent after the next mea-
surement once the app has been
activated.
In order to enable all saved measu-
rement values in the medicus sy-
stem measurement value memory
to be transferred to the app, mea-
surement value transfer of all mea-
surement values must be activated
in the "Settings" menu (default
setting). If "last" is selected here,
GB
73