Resetting Connection; Control The Hood Via The Hob; Hood Control Settings; Cleaning - NEFF T18TS2KN Série Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Note: Connection can only be established when both
appliances are connected to your home network and
the connection process has been initiated for both of
them. If the connection process has already timed out
for one of the two appliances, try to connect again
(basic settings,
setting).
™‚‡

Resetting connection

You can reset the connections you have saved for your
home network and extractor hood at any time.
Touch the
symbol for 4 seconds.
U
1.
The product information will be displayed.
Touch the
symbol repeatedly until the
U
2.
setting appears.
Set the value to
using the twist knob.
3.

Control the hood via the hob

In the basic settings of your hob you can adjust the
behaviour of your extractor hood depending on the
switch-on/off of the hob or individual cooking zones.
~ "Hood control settings" on page 67
You can select other settings using the control panel.
Setting the fan
Switching on
Touch the
symbol.
A
Setting fan level
Use the twist knob to select the fan setting.
You can choose between the levels 1, 2 and 3. To
select the intensive levels, turn the twist knob until
or
appears.
˜ƒ
Switching off
Use the twist knob to select fan setting 0.
Setting automatic mode
Switching on
Touch the
symbol.
A
1.
Turn the twist knob until the
2.
the control panel.
The fan starts up automatically when steam is
produced.
Switching off
Touch the
symbol.
A
1.
Turn the twist knob until the fan setting 0 has been
2.
selected or choose another fan setting.
Setting the hood lighting
You can switch the hood light on and off via the hob's
control panel.
Touch the
symbol.
6

Hood control settings

Y ou can adapt the hood controls to suit your needs at
H o o d c o n t r o l s e t t i n g s
any time.
™‚‡
˜‚
symbol appears on
'
Symbol
Function
Hob-hood connection
™‚‡
Not connected / disconnect.
Connect.
Connected to home network (WLAN).
ƒ
Connected to extractor hood.
Automatic fan switch-on
™‚‰
Switched off.
The hood must be switched on manually if needed.
Switched on in automatic mode.*
In automatic mode, the hood switches itself on when a
cooking zone is switched on.
Switched on in manual mode.
ƒ
The hood switches itself on with a default setting when a
cooking zone is switched on.
Fan run-on
™ƒ‹
The fan switches itself off when the hob is switched off.
Switched on in automatic mode.*
Switched on with standard fan run-on.
ƒ
No change in settings.
Switch light on automatically
™ƒ‚
Switched off.
Switched on.*
The light switches itself on when the hob is switched on.
Switch light off automatically
™ƒƒ
Switched off.*
Switched on.
The light switches itself off when the hob is switched off.
* Basic setting
Note: The
,
,
™‚‰
™ƒ‹
™ƒ‚
displayed if the appliance is connected to an extractor
hood.
DCleaning
S uitable maintenance and cleaning products can be
C l e a n i n g
purchased from the after-sales service or in our e-Shop.

Ceramic

Clean the hob after each use. This will prevent spills
from burning onto the ceramic.
Only clean the hob when it has cooled down sufficiently.
Use only cleaning agents which are suitable for glass
ceramic. Follow the cleaning instructions on the
packaging.
Never use:

Cleaning

and
settings are only
™ƒƒ
en
67

Publicité

Table des Matières
loading

Table des Matières