•
When the Booklet Finisher-P1, Puncher,
Document Insertion/Folding Unit-H1, Duplex
Color Image Reader Unit-G1, Upright Control
Panel-B1, and Paper Deck Unit-D1 are
attached:
2,621 mm
*2 Make sure to provide at least 100 mm of space if none of the Document
Insertion/Folding Unit-H1 or Document Insertion Unit-L1 is installed.
Handling Precautions
•
Do not attempt to disassemble or modify the
machine.
•
Some parts inside the machine are subject
to high-voltages and temperatures. Take
adequate precautions when inspecting the
inside of the machine. Do not carry out any
inspections that are not described in the
manuals for this machine.
•
Be careful not to spill liquid or drop any
foreign objects, such as paper clips or staples
inside the machine. If a foreign object comes
into contact with electrical parts inside the
machine, it might cause a short circuit and
result in a fi re or electrical shock.
1
800 mm or more
*2
•
If there is smoke, or unusual noise,
immediately turn the main power switch OFF,
disconnect the power cord from the power
outlet, and then call your local authorized
Canon dealer. Using the machine in this state
may cause a fi re or electrical shock. Also, avoid
placing objects around the power plug so that
the machine can be disconnected whenever
necessary.
•
Do not turn the main power switch OFF or
open the front covers while the machine is in
operation. This may result in paper jams.
•
Do not use fl ammable sprays, such as spray
glue, near the machine. There is a danger of
ignition.
•
This machine generates a slight amount
of ozone etc. during normal use. Although
sensitivity to ozone etc. may vary, this
amount is not harmful. Ozone etc. may be
more noticeable during extended use or
long production runs, especially in poorly
ventilated rooms. It is recommended that the
room be appropriately ventilated, suffi cient to
maintain a comfortable working environment,
in areas of machine operation.
Preface
19